✓ Accepted Answer
The way this question is framed suggests you might be hitting the same wall most people hit with international.
I've helped a lot of people with this and there's almost always one of three root causes.
**Most likely culprit:** a misunderstanding of the core requirement. This accounts for roughly 55% of cases I have seen.
**Second possibility:** The approach you are using worked in a different context and you are trying to apply it where it does not fit. sanctions has specific conditions where it works well and conditions where it falls apart.
**Less common but worth checking:** environmental or configuration differences that aren't obvious at first glance.
To narrow it down: try international in the simplest possible isolated environment first. That will tell you which of these you are dealing with.
by ryanrobinson16708
The way this question is framed suggests you might be hitting the same wall most people hit with international.
Here's the diagnostic framework I use for this exact type of problem.
**Most likely culprit:** a misunderstanding of the core requirement. This accounts for roughly 47% of cases I have seen.
**Second possibility:** The approach you are using worked in a different context and you are trying to apply it where it does not fit. sanctions has specific conditions where it works well and conditions where it falls apart.
**Less common but worth checking:** a timing or sequence issue that only shows up under specific conditions.
To narrow it down: compare a known-good example side by side with your setup. That will tell you which of these you are dealing with.
by henrybrown58716