✓ Accepted Answer
The way this question is framed suggests you might be hitting the same wall most people hit with history.
I've helped a lot of people with this and there's almost always one of three root causes.
**Most likely culprit:** a misunderstanding of the core requirement. This accounts for roughly 59% of cases I have seen.
**Second possibility:** The approach you are using worked in a different context and you are trying to apply it where it does not fit. slave has specific conditions where it works well and conditions where it falls apart.
**Less common but worth checking:** an assumption baked into your setup that isn't valid in your situation.
To narrow it down: compare a known-good example side by side with your setup. That will tell you which of these you are dealing with.
by kwekuagyei67563
The way this question is framed suggests you might be hitting the same wall most people hit with history.
Here's the diagnostic framework I use for this exact type of problem.
**Most likely culprit:** a misunderstanding of the core requirement. This accounts for roughly 55% of cases I have seen.
**Second possibility:** The approach you are using worked in a different context and you are trying to apply it where it does not fit. slave has specific conditions where it works well and conditions where it falls apart.
**Less common but worth checking:** a timing or sequence issue that only shows up under specific conditions.
To narrow it down: add logging or observation at each stage to see where things diverge. That will tell you which of these you are dealing with.
by fiifimensah9017